: ( 0 Items )


Devices Electrotechnica Elektrokit
Change Currency :   

Areduino Serial + Atmega 8

Areduino Serial + Atmega 8

Areduino Serial + Atmega 8 is a basic board that uses RS232 as an interface to a computer for programming or communication. It has 14 digital input/output pins (out of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a DB9 connection, a power jack, an ICSP header, and a reset button. Areduino Serial + Atmega contains everything needed to support the microcontroller; simply connect it to a computer with a Serial cable and power it with a AC to DC adapter or battery to get started. Areduino Serial + Atmega board comes fully assembled and tested with ATmega8 pre-loaded with boot loader.

Specifications :

  • Microcontroller : ATmega8
  • Operating voltage : 5v
  • Input Voltage : 7v ~ 12v
  • Digital I/O Pins : 14 (of which 6 provide PWM output)
  • Analog Input Pins : 6
  • Comes with an ATmega8 with a pre loaded Arduino boot loader
  • Auto reset feature
  • Auto reset enable/disable jumper, to avoid not desired resetting
  • Arduino Diecimila compatible reset pin
  • Pin13 onboard led, with current limiter resistor
  • TX and RX onboard led
  • Jumper to disable serial communication and to enable RX external pull down resistor, to avoid “RX floating error”. This feature allows using digital pin 0 and pin1 as a normal pin, when serial communication is not needed
  • 8 Kbytes Flash program memory
  • 512 Bytes EEPROM

Contact Us

Mobile : +9373126699

Phone : +91-712-2538382

Call Us : 08033647700

E-mail : info@elektrokit.in